Proficient Kenmore Front Load Washer Repair

Certified Kenmore Front Load Washers Repair Service

At Repair Kenmore, you can get all the Kenmore front load washers repair service you need for your appliances. We have certified and trustworthy technicians that can solve any issue you have with your appliance. Trust in Repair Kenmore for your Kenmore washer and Kenmore dryer appliance repairs.

• Kenmore front load washers won't work
• Front-load washing machines use a door switch, lock, and strike that are engaged before the washer will start. If the Kenmore front load washers won't work, inspect the door switch in the door frame and ensure the lock engages with the strike. Disconnect the power and remove the front panel to check the switch continuity, and replace it if needed.

• Kenmore front load washers vibrate or shake excessively
• All front-load washing machines have shock absorbers used to dampen the tub movement in the spin cycle. If your Kenmore front load washers vibrate or shake excessively, the shock absorbers must be weak or become damaged, unbalanced loads will cause the washer to shake or move, and the machine will often make a loud banging sound during the spin cycle.

• Kenmore front load washers are leaking water
• Washer door seal or boot is the rubber gasket that seals the door on a front-load machine when it is closed. It can be torn or becomes too stiff to seal properly. In that case, water will leak from the door when the machine is filled. If your Kenmore front load washers are leaking water, contact an expert right away!

• Kenmore front load washers won't drain
• If your Kenmore front load washers don't drain, debris can clog the drain hose and prevent your washer from draining. A twisted or coiled drain hose can also inhibit the free flow of water. Check behind the washer and straighten a kinked hose. 

• Kenmore front load washers fill slowly or won't fill at all
• Replace the water inlet valve if the Kenmore front load washers fill slowly or won't fill at all. The home water pressure might be too low. The water inlet valve requires at least 20 psi to function properly. Check the water pressure to the valve to determine if it is sufficient.

• Kenmore front load washers won't spin
• Front-load washer tubs spin thanks to a drive belt that runs off of the motor. If your Kenmore front load washers don't spin, a loose, frayed, or torn belt could be why your washer won't spin. Overloading your washing machine can cause the belt to loosen or become worn out. Inspect the drive belt closely.

• Kenmore front load washers are making a loud noise
• The drain pump might be clogged or defective if the Kenmore front load washers make a loud noise while draining. To determine if the washer motor is defective, remove the drive belt and run the motor. If the motor is still loud, the drive motor is defective and needs to be replaced.

• Kenmore front load washers won't agitate
• If your Kenmore front load washers won't agitate, the problem is likely to be a faulty lid switch, a broken belt, or a problem with the motor.

• Kenmore front load washers are overflowing
• If you put regular detergent into a front-load machine, it creates too many suds and prompts the water valve to fill the machine with more water to flush out excess suds, all of which can overflow the machine. If your Kenmore front load washers are overflowing, call a technician today!

• Kenmore front load washers door or lid won't lock
• If the Kenmore front load washer's door or lid won't lock, the washer door will not latch properly. The door latch assembly might be defective. Inspect the door latch for damage. If the door latch is damaged, replace it.